FORGOT YOUR DETAILS?

Friday, 02 September 2022 / Published in Boiler, Steam Boiler

Combustion is an important process to generate steam in the process and manufacturing industries. The process includes burning various fuels that heat the water and produce steam. However, neglect in maintenance of the boiler system results in several boiler issues that can impact the efficiency of the process operations. One of the primary challenges of burning fuels is to manage the corrosion caused by the furnace heat transfer surfaces. Fireside corrosion is the major reason for failure in the superheater and reheater tubes. Boiler corrosion leads to outages and cases of tube failures of steam boilers in power plants. Not only power generation plants are affected by corrosion and failure of boilers, but any facility that uses steam boilers can face disruptions from corrosion damage.

What is Furnace Corrosion?

Fireside corrosion in the superheaters and reheaters is termed coal ash corrosion in coal-fired units, oil ash corrosion in oil-fired units, and ash corrosion in waste-recovery boilers. In some instances, fireside corrosion is also named hot corrosion. The mechanism in each scenario is similar, but the low-melting species in each differ. In coal ash corrosion, the low-melting substances are usually sodium or potassium iron trisulfate (Na3Fe(SO4)3 or K3Fe(SO4)3). In oil ash corrosion, it is usually V2O5-Na2O or V2O5-Na2SO4, and in waste heat-fired boilers, it is generally chlorides of iron and zinc, along with other possibilities. High temperatures above 1,000F of the superheater/reheater encourage the formation of these low-melting compounds.
The corrosion in coal ash corrosion ranging between 1,100F and 1,250F is very high. In such a temperature range, Na2SO4/K2SO4 reacts with surface oxides along with SO3 to form complex liquid sulfates (Na3Fe(SO4)3 or K3Fe(SO4)3) that cause corrosion.

The elements in oil ash corrosion include vanadium, sodium, potassium, and sulfur. The liquid fuel combustion generates low-melting species V2O5-Na2O, V2O5-K2O, V2O5-Na2SO4, and V2O5-K2SO4. Depending on the composition, the melting points of the compounds are between 1,000F and 1,550F. The oil ash corrosion is similar to coal ash corrosion with low-melting-point liquid forms and dissolves the protective iron oxides.

In waste-recovery boilers, chloride, and sulfate cause the formation of low-melting-point liquids on the tube surface that includes zinc, iron, lead, and sodium. It dissolves the protective iron oxide and brings the bare steel in contact with the corrosive environment, leading to significant wall loss. Lowering the conditions in the furnace results in the formation of iron sulfide rather than iron oxide. The carbon and iron sulfide present in the ash deposits indicate reducing conditions. Hydrogen chloride can impact iron sulfides instead of oxides to form iron chloride as a corrosion product. The iron chloride consists of a relatively low boiling point and forms vapors in the superheater/reheater temperature range. The corrosion mechanism is by the loss of iron as a vapor.

Furnace wall tubes are also impacted through fireside corrosion, but the low-melting elements differ from superheater/reheaters. Sodium and potassium pyrosulfate (Na2S2O7 or K2S2O7) causes the furnace wall corrosion. Both the elements melt below 800F, where the furnace wall tubes operate. The melting point of Na2S2O7 is 750F and of K2S2O7 is 570F. Combining the two compounds can melt at even lower temperatures.

Effects of Corrosion:

Lost Efficiency

Corrosion and scale deposits impact steam boiler efficiency. Even scale buildup as small as an eighth of an inch can reduce the efficiency.

Scale buildup contributes to more corrosion by trapping sodium under the scale, pitting the inside surface. It leads to further damage inside the boiler and its tubing. Holes in the metal result in leaks that cause severe operational problems and boiler shut down.

Shorter Lifespan

Overlooking corrosion reduces the lifespan of the steam boiler system. Corrosion increases with time if the water chemistry is neglected. The efficiency loss degrades until the system shuts down.

Higher Costs

Corrosion can lead to excessive costs for repairing the system or replacing damaged parts. In many cases, pitted tubes or parts need to be replaced rather than repaired. The system should be shut down to fix the damage that reduces productivity. Additionally, the downtime cuts into the operations and profits.

Holes

Holes occur while operating a system with severe pitting. The pits do not repair themselves or reverse their severity. It deteriorates as the chemical reaction that caused the erosion continues until the metal has a breech.

Pitting

Steam boilers having high levels of oxygen react with the metal to cause pits on the surface. If overlooked, the pits continue to deepen till they create holes in the metal. The holes can lead to the failure of the system.

Preventing Corrosion in Steam Boiler:

Monitoring the System

Maintaining the acid-base balance of the water is crucial to prevent acidity from damaging the steam boiler. Even with proper attention to the feedwater, there may be contaminants in the boiler itself. Monitoring the pH helps in determining when to blow down the system to remove contaminated water and reduce its impact.

The pH for feedwater is between 7 and 9, slightly alkaline. Sodium phosphate salts or sodium hydroxide are added to control the water within the range. However, the pH inside the heat of the boiler can be directly monitored and instead measured from a cooler, lower-pressure side stream.

Checking the water and steam for sodium also helps in preventing corrosion by determining the need to control the minerals present in the system.

Adjust Feedwater

Feedwater adjustment prevents the impact of dissolved oxygen on the metal surface of the system. Depending on the results, scavenging agents or added or a deaerator is used for getting rid of oxygen.

Three chemicals are common for scavenging oxygen

  • Sodium sulfite: Usually used in medium or low-pressure systems
  • Hydrazine: Ideal for high-pressure boilers
  • Sodium erythorbate: Non-toxic and can replace the other two chemicals for use in food processing.
  • Conclusion:

    Rakhoh Boilers is one of the trusted boiler manufacturers in Pune since 1983. With 38+ years of experience and expertise in thermal solutions, we deliver highly efficient and reliable industrial steam boilers, waste heat recovery systems, thermic fluid heaters, and boiler accessories to over 20 process industries in 26 countries worldwide. We provide excellent boiler services to boost the efficiency and productivity of the boilers.

    Visit www.rakhoh.com for more details on our products and services

    Friday, 26 August 2022 / Published in Boiler, Steam Boiler

    Process and manufacturing industries require equipment for heating purposes. Heating in the industry takes place in two ways, i.e., direct heating and indirect heating. Direct heating involves the heating operation taking place directly through the combustion of fuels, heating filaments, or flame radiations. On the other hand, indirect heating involves heat transfer fluid circulating between the heater and the process. In indirect heating systems, heat from combustion sources like fuel is passed to the hot oil or thermal fluid. The heat is carried to the exchangers, such as reactor jackets, calendar rolls, platens, molds, etc. The heating system controls temperatures and supplies heat to the heat users from one primary heating unit or multiple units.

    The efficiency of Thermic Fluid Heater:

    Heat transfer oils are petroleum-based, either mineral or synthetic. The oil degrades as it comes in contact with high temperatures, air, or poorly designed circulation piping systems. The byproducts of degradation are soot, coke, carbon, and sludge that circulate through the overall process. It reduces the overall heat transfer efficiency, leading to higher operational costs, the danger of fire, and higher maintenance costs.
    There are two primary components of a thermal fluid heater that impact its overall efficiency. The first is the design of the heater pressure vessel and the second is the burner. The thermic fluid heater is limited by the efficiency rating that drops the stack temperature below the dewpoint. The efficiency rating is usually 84% to 85%. The oil heater is fitted with an economizer to exceed 85% efficiency, which is a heat-exchange device in a boiler or thermal fluid heater that improves efficiency and saves fuel.

    Pressure Vessel Efficiency:

    A thermic fluid heater must harness as much heat from the combustion process as possible before the exhaust gasses exit the heater. The longer it circulates in the unit, the more efficiently the heat is transferred to the pressure vessel and later, to the hot oil. Therefore, reducing the temperature of the exhaust gasses significantly improves the efficiency. Similarly, the improved efficiency leads to using less fuel to produce the same heat in the process.
    In thermic fluid heaters, two sets of coils are designed for allowing three passes of the hot gasses over the heating surfaces. Some boiler manufacturers gather additional efficiency from the hot gasses through fins on the coils and by offering stack economizers. It is particularly helpful if the plant needs heated water as the wasted heat exiting the thermal fluid heater is used for heating the water. If hot water is not required, an economizer may or may not contribute to the overall efficiency.

    Burner Efficiency:

    The primary function of the burner is mixing the gas and air for combustion and controlling that combustion for the firing rate to match the load. Burner efficiency is determined by mixing the gas and the air and providing an effective burn close to the burner head. Efficient burners are defined as ones that burn clean with little or no carbon monoxide (CO) and a minimal amount of excess air. Too little air leads to a burner with unburned fuel that translates to carbon monoxide.

    An optimally efficient burner can achieve complete combustion with 2% to 3% of excess oxygen without releasing carbon monoxide (CO). Since CO2 is produced in the combustion process, a higher CO2 percentage leads to a lower oxygen percentage. It results in increasing efficiency.
    It is also necessary to consider the burner tune or the gas/air mixture. It is imperative to bring changes in tuning between low fire and high fire for keeping the burner in perfect tune during all firing rates.

    Tips to Increase the Efficiency of Thermic Fluid Heater:

    Optimizing the Pump:
    Pumps require the most energy as equipment in any plant and must be selected wisely. Similarly, the proper configuration of the pump can result in significant savings by avoiding operational costs. Some ways to optimize the pumps in a thermic fluid heater are:

  • Using a heat transfer fluid with high viscosity.
  • Implementing rotation speed control of pump
  • Using pump impellers.
  • Reducing Pressure Losses:

    Pressure losses cause higher power consumption and also result in the non-optimal use of pumping systems. Some of the ways to reduce pressure losses in the different components of a thermic fluid heater are:
    Using higher cross-sections in the piping to reduce pressure loss.
    Pre-assembled pump systems as it has a compact design with short piping lengths to keep pressure losses in check.
    Larger openings in pumps or fittings reduce the pressure losses.

    Quality of Heat Transfer Fluids:

    Heat transfer oils of higher quality are ideal as they are more stable. Such fuels with better heat transfer properties reduce the production time. Reduced process times result in less chances of production failures. The lowered maintenance or repair work increases productivity by minimizing the downtime of the plant.

    Optimization of Firing Plant:

    The overall efficiency of the thermic fluid heaters is also achieved by optimizing the firing process. By installing rotary speed controls for combustion fans, process plants improve firing efficiency and reduce start-up losses. Similarly, reducing exhaust gas losses, using air pre-heaters, controlling oxygen intake, etc., can increase the efficiency of the firing process.

    Advantages of Thermic Fluid Heater:

  • Cost-effective
  • Efficient
  • Minimum Maintenance
  • Easy to Install
  • Less Operational Requirements
  • Safe and Reliable
  • Thermic Fluid Heater by Rakhoh Boilers:

    Rakhoh is a leading name as boiler manufacturers for Steam boilers, Boiler accessories, Waste Heat Recovery Boilers, and Thermic fluid heaters for more than 38 years. Our thermic fluid heater comes in a compact, horizontal design. The 4 pass design with a proven coil ensures instant heat and automation control maintains thermic fluid temperature. It includes ID and FD Fans, Internal Air Preheaters, an Automation system, etc.
    It consists of various grates, an auto-feeding system with screw feeder, and a Fluidized Bed for optimal combustion. Our Thermic Fluid Heater offers a multi-fuel firing option, optimal energy utilization, reliability, and up to 82% efficiency.

    For More Info Visit : www.rakhoh.com

    Friday, 19 August 2022 / Published in Boiler, Steam Boiler

    One of the most integral equipment in the process and manufacturing industries is the industrial boiler system. Steam is essential for performing the various operations in the plants. Therefore, industries take various factors into account before deciding on a boiler manufacturer for their plants. Not only is investing in a new boiler system an expensive affair, but it also needs assurance of longer performance and efficiency for seamless operations. The process plant tries to get as many years out of the boiler as possible, by conducting routine maintenance. It results in not only extending the life of the steam boiler but also improving its efficiency. On the other hand, regardless of how well anyone maintains a boiler system, it will eventually need to be replaced.

    Factors to consider while selecting a new industrial boiler system:

    Several factors are taken into account by the plant owners before they decide on a boiler manufacturer. Some of the noteworthy factors are as follows,

    Expenses spend for repairs:

    It is necessary to take a closer inspection on how much money is spent on repairs. It is necessary to stop investing money into repairs if there is a significant increase in the repair bills or if frequent assistance of boiler maintenance is required for the process plant. Even though replacing a boiler is an expensive process, it is even more expensive to continue repairing the old system. If the cost of repairs is rapidly growing, it is time to install a new boiler for the industry.

    How old is the current boiler?

    It is also important to consider how old the current industrial boiler is. Boilers can function for several years depending on when it was manufactured, what purpose it serves, and its maintenance. If process plants have had the same commercial boiler for a couple of decades, it may be time to replace it.

    Energy efficiency:

    Energy efficiency is a major factor to take into account while choosing an industrial boiler system. Boiler manufacturers in India and all over the world consider the environmental impacts of their manufactured products.

    Warranty of the boiler:

    Top boiler manufacturers advise to always consider the terms of the warranty. A warranty is particularly important in inspecting how reliable the boiler system will be. Most of the warranties range from 10 to 15 years. However, industries must always be on the lookout for a longer warranty with good terms and conditions.

    Size and space considerations:

    The size of the steam boiler is imperative to fit it in the boiler room. Usually, process plants look for a boiler that has as small of a footprint as possible, as it saves both space and money. The smaller-sized boiler creates flexibility in space. It creates additional space in the boiler room and the possibility for multiple modular boilers working on the same system to improve efficiency and reduce the operating costs even further.

    Safety of the boiler:

    Safety should always be the utmost priority while choosing a new boiler. Sometimes, conventional steam and hot water boilers become overheated, leading to the build-up of high-pressure steam that can cause a hazardous explosion. One way to prevent the risk is installing a boiler system designed for low water content operation. With such industrial boilers, the amount of steam build-up cannot do excessive damage even if the unit malfunctions.
    Another risk with conventional boilers is their design itself. The maintenance for these units requires the opening of heavy steel doors, realigning them, and closing them again by standing on a ladder which may result in various injuries.

    Emissions:

    With the ever-increasing air pollution, greenhouse gasses, and the environment, boiler manufacturers are making sure to prevent any harm caused by the industrial processes. Various industries face difficulties due to emissions from the use of conventional boiler systems. Even while using natural gas, these boilers release large amounts of CO2 and toxic nitrogen oxides (NOx) into the atmosphere, damaging the environment.

    Easy Maintenance:

    It is also important to consider how frequently the maintenance of the boiler system will require it to function at its best for as long as possible. Low-quality boilers require regular repairs that lead to excess costs and may result in replacing the boiler sooner than expected. A well-maintained steam system includes more than the pressure vessel condition itself. Effective monitoring and control systems can also help in identifying and fixing small problems before they turn into bigger issues.

    Conclusion:

    Rakhoh Boilers is one of the trusted boiler manufacturers in Pune since 1983. With 39+ years of experience and expertise in thermal solutions, we deliver highly efficient and reliable industrial steam boilers, waste heat recovery systems, thermic fluid heaters, and boiler accessories to over 20 process industries in 27 countries worldwide. We provide excellent boiler services to boost the efficiency and productivity of the boilers.

    Visit www.rakhoh.com for more details on our products and services

    Thursday, 18 August 2022 / Published in Boiler, Steam Boiler

    Steam Boilers are crucial for the processing operations in manufacturing industries throughout the world. As a leading boiler manufacturer and thermal solutions provider, Rakhoh Boilers are proficient in detecting inefficiency in the steam boiler system. However, reduced efficiency does not necessarily call for boiler replacement. It is important to understand that boiler replacement is an expensive and time-consuming process that should be considered a last resort. Steam boilers are an integral asset that operates efficiently for two to three decades if properly and regularly maintained. It is essential to understand signs that detect the requirement of boiler replacement and take the necessary course of action.

    Factors to Consider for Steam Boiler Replacement:

    While considering boiler replacement, it is prudent to assess three important factors- Safety, Economic, and Requirement Changes

    Safety Changes:

    Safety issues are usually detected during regular inspections as the inspectors check the condition of pressure vessels and boiler safety equipment. Along with a regular examination of steam boilers, it is necessary to monitor the process operations.

    Excess Cycling:

    Consistent starting and shutting off steam boilers increases the thermal cycles that impact the pressure vessel. Fatigue in boiler steel is caused due to excess thermal cycles and resultant stress.

    High Stack Temperature:

    Stack temperature exceeding the normal level indicates poor heat transfer and hazardous conditions due to poor water quality, improper combustion, and low water levels.

    Improper Starting and Shutting:

    Irregular starting and shutting indicate the improper functioning of the operating and safety controls of the steam boiler.

    Poor Combustion Tuning:

    Error in fuel and airflow leads to pulsations and surging. It is usually caused by problems in the combustion fan, improper burner adjustment, improper stack design, and conditions.

    Safety issues in steam boilers generally occur as waterside issues or fireside/combustion side issues. In most cases, issues in waterside are caused by poor water treatment that includes,

    Water Hardness:

    Scaling develops on the steam boiler tubes due to the absence of a water softener or improper water treatment. The scale formation hinders the heat transfer and results in overheating.

    Poor Water Chemistry:

    Lack of water chemistry control leads to caustic embrittlement that causes tubes to lose their vital mechanical properties.

    Presence of Oxygen:

    Improper water treatment system leads to oxygen pitting on the surface of the tube that consequently leads to corrosion.

    Quenching:

  • Inappropriate water circulation leads to overheating specific areas of the steam boiler. The sudden cooling of overheated steel develops cracks that result in boiler failure.
  • Fireside or combustion side safety issues are caused by poor tuning or fuel and air issues. It includes,
  • Improper tuning:

    Improper tuning leads to improper combustion and carbon deposits.

    Outdated control equipment:

    Outdated controls result in poor air and fuel control

    Unsafe operating controls and safety equipment:

    It includes unreliable flame scanners, safety relief valves, pressure and temperature switches, etc.

    Economic Changes:

    Reduced efficiency in steam boilers is a significant reason to consider boiler replacement. That is because inefficiency in the boiler leads to acceleration in fuel costs and operating hours. Therefore, improvements towards the efficiency of the steam boiler can considerably save the costs of the processing facilities. Along with it, consideration of the extent of reparation determines the need for boiler replacement. Sometimes, the cost of repairing can be expensive enough that boiler replacement would be a better alternative.

    Requirement Changes:

    Advancement in technology and steam boiler design indicates that investing in boiler replacement would be a wise decision in the long run. An oversized boiler operating in a low range and occupying the majority of space is less desirable than boiler systems that are optimal for the load requirement. Such boilers can substantially reduce the excess costs and provide enhanced efficiency and performance. Plant managers can consult expert boiler manufacturers to understand their processing unit requirements.

    These considerations must be given due attention before deciding on boiler replacement. Along with it, current and future plant loads should also be considered before replacing the boiler system.

    Tips for Boiler Replacement:

  • Ensure Proper Boiler Size as per the Requirement of the Processing Plant
  • Load should be Optimal to Boiler Size and Design
  • Examine the Main Piping for Insulation
  • Determine the height of Water Level
  • Heat the Boiler but Avoid Steam Generation during Start-Up
  • Adjust Pressure Control Properly
  • Draw a Mark on Gauge Glass
  • Ensure Regular Maintenance of Steam Boiler
  • Proper Training to Operating Personnel for Handling and Operating the Boiler System
  • Conclusion:

    Rakhoh Boilers is a trusted boiler manufacturer in Pune since 1983. With 38+ years of experience and expertise in thermal solutions, we deliver highly efficient and reliable industrial steam boilers, waste heat recovery systems, thermic fluid heaters, and boiler accessories to over 20 process industries in 26 countries worldwide. We provide excellent boiler services to boost the efficiency and productivity of the boilers.

    Visit www.rakhoh.com for more details on our products and services

    TOP